(v2.0.0) This User Guide shows how to work with the new v2.0.0 release for Ensemble E8 devices, including how to use pre-built images to program a demo distribution of Linux into the on-chip MRAM or into the off-chip OSPI flash memory on the Ensemble E8 DevKit (DK-E8). This release includes HyperRAM support for user programs.
This VS Code project template is for use with the Ensemble evaluation kits and devices. NOTE: After cloning this template file to a project folder, open up a terminal window in that folder and execute the command “git submodule update -–init”. This will load the board library sub-module.
(v1.4) This app note provides tips and techniques for printed circuit board (PCB) layout for the Alif Balletto B1 family wireless MCUs. This document will provide PCB guidelines for proper power distribution and decoupling, and signal integrity to ensure a successful PCB design.
RF Shielding PCB Design Guidelines for Balletto B1 Wireless MCUs
(v1.0) This app note details the PCB guidelines for including an RF shield over a Balletto B1 wireless MCU in order to reduce RF emissions. The other two are public versions of our layout guidelines for B1 and E1C devices.
(v1.2) This app note provides tips and techniques for printed circuit board (PCB) layout for the Alif Ensemble E1C family MCUs. This document will provide PCB guidelines for proper power distribution and decoupling, and signal integrity to ensure a successful PCB design.
(v1.3)
In this App Note we show users how to take a post-development, production-grade binary image and provision the device. We also show how to perform post-deployment, field-over-the-air (FOTA) updates.
(v1.1) This document lists step-by-step instructions for safely updating the SERAM image on development systems to remove the risk of any conflict with the application already running on the device. It also contains troubleshooting tips and checks to run on an unresponsive development board.
(v1.1) This Application Note covers the RTSS sub-systems with the Cortex® M55 CPUs in any of the Alif Semiconductor® Ensemble® family of MCUs. By the end of this document, you will be able to exercise some of the power saving features and measure results matching the datasheet.
(v1.0) This app note discusses the different functions that the Conductor device configuration tool can perform to set up the device configuration for a particular Alif Ensemble design.
(v1.71) This app note provides tips and techniques for printed circuit board (PCB) layout for the Alif Ensemble E1, E3, E5, E7 family MCUs and fusion processors. This document will provide PCB guidelines for proper power distribution and decoupling, and signal integrity to ensure a successful PCB design.
(v1.0) This app note provides tips and techniques for printed circuit board (PCB) layout for the Alif Ensemble E4, E6, E8 family MCUs and fusion processors. This document will provide PCB guidelines for proper power distribution and decoupling, and signal integrity to ensure a successful PCB design.
(v1.01) This app note shows how to configure the Segger Ozone software and J-Link debug probe to do stand-alone debugging of Alif Ensemble device applications.
